Firmware & Updates

Choose Product Model

Release Date
Version
Download
2024-4-19
V1.0.1.6
2024-7-12
V1.0.1.6 Interim Version
2024-7-12
V1.0.3.2 H100
2024-10-15
V1.0.3.9 H100
2025-4-10
V1.0.4.2 H100
2025-4-10
V1.0.4.2 H110
2025-9-2
V1.0.4.6 H100
2025-9-2
V1.0.4.6 H110
2026-7-30
V1.0.5.6 H100
2026-7-30
V1.0.5.6 H110

Details

  1. V1.0.1.6_Interim Version. If the version is below 1.0.2.0, please update this version first.
  2. V1.0.3.2. If the version is above 1.0.2.0, then you could upgrade directly; Otherwise, you need to upgrade to the interim version first.
  3. V1.0.3.9. If the version is below 1.0.3.9, please update 1.0.3.2 first.
  4. V1.0.4.2. Optimizing performance Unicast mode support 1TX & 4RX.
  5. V1.0.4.6.
    1. Added WPS groups; Receivers can be paired with Vcore.
    2. Optimized user experience with Pyro 7.
    3. Please upgrade to version 1.0.4.2 before upgrading to this version.
  6. V1.0.5.6
    1. Upgraded H.265 encoding/decoding; added compatibility with Pyro Ultra.(Note: Pairing issues may occur when using upgraded and non-upgraded devices together; it is recommended to upgrade both the TX and RX.)
    2. Optimized the still-frame strategy.
    3. Optimized the single-broadcast connection logic.
    4. Fixed known issues.

Attentions

  • Make sure the device have enough power when updating, pls don't unplug the USB disk before the update process is completed and successful.
  • The device will change to default settings automatically after updated.
  • The firmware updating takes the risks to cause unknown error, pls do not upgrade the device when you using it on-site.

How to check the device`s firmware version

Long press the middle button to enter the menu page, select the system---version info to check the firmware version.

Operations to update the Pyro S firmware version

1.Prepare a USB flash disk with Type-C connector and storage less than 32GB, format the USB disk to FAT32.
2.Download the firmware to USB flash disk and make sure it is under the root directory, pls don't put it inside of any folder.
3.Connect the USB disk to Pyro S via type-C port, it will recognize the USB disk automatically and start to updating
If update failed after tried several times, you can contact our technical support team from Hollyland for help: support@hollyland.com