Released date | Firmware Version | Download |
|---|---|---|
2026.8.4 | Base Station: V1.1.5.3 Beltpack: V1.0.4.5 | |
2023.8.10 | Base Station: V1.1.5.0 Beltpack: V1.0.4.5 | |
2022.7.15 | Base Station: V1.1.3.6 Beltpack: V1.0.4.5 |
Details
- Base Station: V1.1.5.3;Beltpack: V1.0.4.5: Compatible with Solidcom M1 Pro Beltpacks（V1.0.1.8).
- Base Station: V1.1.5.0;Beltpack: V1.0.4.5:Updated the channels of Japan Standard
- Base Station: V1.1.3.6；Beltpack: V1.0.4.5：Enhanced compatibility with cascades
1. Kindly Note:
- It takes a risk to update the firmware. Please avoid updating the firmware when the device is used for important events.
- To avoid the power being cut off suddenly during the update, please make sure the device has enough power during the update.
- Please feel free to contact our technical support engineer if the updating failure or error causes the malfunction of the device. The link for contacting Hollyland Technical Support Engineer: support@hollyland.com
2. Operation Steps
2.1 Upgrade By USB Disk
- Prepare one USB disk which memory less than 32G, and format it to FAT32.
- Check the base station hardware version from version info page(H000, H001 or H002). download the upgrade files from the link and select the corresponding upgrade file, and then put it to the root directory of the USB flash.
- Step 3 Connect the USB disk to the base station, and the device will start the upgrade automatically, after upgrade successful, the base station will reboot automatically.
- Step 4 Connect the belt pack to the base station one by one, and the belt pack will be recognized for upgrade.
2.2 Upgrade By Browser Based software
- Check the base station hardware version from version info page(H000, H001 or H002)，and then connect the base station via WiFi or LAN a. Connecting to the base station via Wi-Fi or LAN.Connecting to the base station via Wi-Fi1. Turn on the Wi-Fi under the network settings on the Solidcom M1 front panel.
2. Connect the base station to a laptop via Wi-Fi with the default password 12345678.
3. Open a browser, enter the IP address 192.168.217.100, and then log in to the web page(User:admin Password:12345678).
Connecting to the base station via LAN
1. Turn off the DHCP under the network settings on the Solidcom M1 front panel and check the base station IP address (default: 192.168.218.10).
2. Connect the base station to a laptop via the LAN port with an Ethernet cable.
Set up the IP address of the laptop and make sure the IP address is in the same network section as the base station such as 192.168.218.25.
3. Open a browser, enter the IP address of the base station, and then log in to the web page(User:admin Password:12345678).
- Switch to "settings" page, and then go to "firmware upgrade " and select the corresponding upgrade file, and the device will start the upgrade automatically, after upgrade successful, the base station will reboot automatically.
- Connect the belt pack to the base station one by one, and the belt pack will be recognized for upgrade.