LARK M3 | Hollyland Support

Connecting via 3.5mm cable:

Connect the receiver to the computer using a 3.5mm TRS-to-TRRS cable; plug the TRRS end into the computer and the TRS end into the receiver's 3.5mm port (note: if the desktop computer has a TRS microphone input, a TRS-to-TRS cable is required instead).
Select the corresponding external microphone option in the computer's microphone settings.

Connecting via USB-C/USB-A to USB-C cable:

Connect the computer's USB-C or USB-A port to the receiver's USB-C port using a USB-C/USB-A to USB-C cable.
Select [Wireless Microphone] in the computer's microphone settings.

When My Voice Profile is enabled, up to four TX devices can independently apply their saved voice enhancement presets. You can customize the voice enhancement settings for each TX according to your specific needs.

When One-Tap Voice Enhancement is enabled, all connected TX devices will apply the same voice enhancement effect simultaneously. Any TX device connected afterward will also automatically apply the same effect. Different voice enhancement effects cannot be independently applied to the four TX devices in this mode.

Smart Mix is designed for multi-person recording scenarios. When using more than two TX devices for recording, enabling Smart Mix reduces ambient noise from the multi-person recording environment while prioritizing the voice of one main speaker, helping ensure clear audio for the main speaker.

Note: Smart Mix is only supported in Mono mode.

LARK M3 supports up to four TX and four RX devices (4 TX + 4 RX). Within this limit, TX and RX devices can be flexibly combined according to your needs, such as 2 TX + 3 RX or 4 TX + 1 RX.

Yes. LARK M3 supports using Camera Receivers and USB-C Receivers together when multiple RX devices are used simultaneously. As long as the total number of RX devices is no more than four, Camera Receivers and USB-C Receivers can be flexibly combined according to your needs.

When using LARK M3 with an iPhone to record 32-bit float audio, the following apps can be used for recording:

Adobe Audition
n-Track Studio (iOS)
Audio Evolution Mobile
Feritte Recording Studio
Apogee MetaRecorder
Cubasis
Auria Pro

LARK M3 supports 32-bit float audio recording. However, both the recording device and the recording app must support 32-bit float recording for it to work properly. If either one does not support 32-bit float, the audio will automatically be recorded in 24-bit instead.

Due to software limitations, the Voice Memos app and the built-in Camera app on iPhone do not support 32-bit float audio recording.

Due to differences in the hardware and software design resulting from the four-track recording feature on LARK M3, the hot shoe accessories for the two microphone systems are not fully cross-compatible.
The LARK M3 hot shoe accessories can be used with LARK MAX2, but the LARK MAX2 hot shoe accessories cannot be used with LARK M3.

FAQ

Quick Answer

Visual Guides