Yes, it can be defined by 8 available modes (Talk and Force Listen, Talk-only, Listen-only, Dual Talk and Listen, Talk and Listen, Announce, Force Talk and Force Listen, and Force Listen).
Yes, it does.
No, it does not support the tally function.
Up to 6 hours with a fully charged battery
NP-F battery
Two batteries for each beltpack
Built-in panel antenna: About 1300ft (400m) one-way transmission range front the panel and an extra 160ft (50m) range from the back side.
External FRP antenna: About 985ft (300m) 360° radius range
Directional dynamic microphone
To connect two Solidcom M1 systems, use IP cascade or 4-wire cascade; to connect more than two systems, use IP and 4-wire cascade together.
Yes, it does. There is a 3.5mm jack on the beltpack that supports electric microphone headsets. The 3.5 mm headset comes as an optional accessory.
You can set the groups via the front panel on the base station or web page.
They can be cascaded via the 4-wire interface with a CAT5e cable.
They can be cascaded via the 4-wire interface with a RJ45 to XLR*2 cable.
They are paired before shipping out from the factory.
Pairing is required when you change a beltpack or add a new beltpack.
Simply connect the beltpack to the base station using a USB-C cable and select Pair on the beltpack.
Turn off the Denoise function in the beltpack settings (this function can be disabled in a quiet working environment).
Yes, it does. The noise cancellation function can be turned on or off on beltpacks.
Step 1: Download the Hollyvox app.
Step 2: Connect a control device (like iPhone) to the Solidcom M1pro base station in the same LAN. (Connect the devices via Wi-Fi directly or connect them to the same network by router)
Step 3: Open the Hollyvox app to perform settings.