LUT Import (via SD card or USB drive):
- Prepare a USB drive or SD card ≤32GB, format as FAT32 or NTFS (SD card can skip formatting)
- Copy .cube format LUT files to the root directory
- Connect the USB drive to the monitor via Type-C OTG adapter (or insert SD card directly into the slot)
- Swipe up on the screen to summon the bottom menu → Click "+" → Add [3D LUTs] from the right-side menu
- Click the menu bar icon
to open the 3D LUTs secondary menu, select one position from L1~L6, click the LUT file "+" and select the LUT file from the folder to overwrite
Supported LUT specifications for import: 16/17/32/33/64/65 bit, .cube format only.
Apply LUT:
- In the [3D LUTs] menu, directly click L1~L6 to switch to the corresponding LUT
LUT Effect Range Description:
- (SDI signal source) When transmitter (TX) enables LUT: TX loop-out, TX recording, RX screen display, RX output, RX recording all have LUT effect
- When receiver (RX) enables LUT: Only RX screen display and SDI OUT output have LUT effect, HDMI OUT and RX recording do not have LUT