Cascade with Clear-Com 702
Settings
Method 1: Connect SolidcomM1 pro to Clear-Com 702 via the 2-wire interface. The key settings are the 2-wire settings on the SolidcomM1 pro front panel, including input & output gain settings, cable length compensation, and others.
Method 2: Connect SolidcomM1 pro to Clear-Com 702 via a 2/4-wire converter. The key settings are the 4-wire input & output gain settings on the SolidcomM1 pro front panel as well as the input & output gain settings on the 2-/4-wire converter.
- Cascade with Clear-Com FreeSpeak II
Settings
- Method 1: Connect SolidcomM1 pro to FreeSpeak II via the 2-wire interface. The key settings are the 2-wire settings on the SolidcomM1 pro front panel, including input & output gain settings, cable length compensation, and others.
- Method 2: Connect SolidcomM1 pro to FreeSpeak II via the 4-wire interface. The key settings are the 4-wire input & output gain settings and the line sequence settings on the SolidcomM1 pro front panel.
Cascade with RTS MRT-327
Settings
- Connect SolidcomM1 pro to MRT-327 via the 2-wire interface. The key settings are the 2-wire settings on the SolidcomM1 pro front panel, including input & output gain settings, cable length compensation, and others.
Cascade with Green-GO MCX Rack Station
Settings
- Connect SolidcomM1 pro to MCX Rack Station via the 4-wire interface. The key settings are the 4-wire input & output gain settings and the line sequence settings on the SolidcomM1 pro front panel.
How Does SolidcomM1 pro Work with an Audio Mixer?
Connection
Step 1: Connect your PC to the mixer, play music, and then connect a headset to the mixer via the audio output port to check if there is music output.
Step 2: Connect SolidcomM1 pro to the mixer via a RJ45 to dual XLR cable and check if there is music output on your beltpack. If not, please enter the menu interface on the base station and then select Order Switch under the 4W Settings options to modify the line sequence definition.
Step 3: Use a phone to make a video call to your PC, and then you can use SolidcomM1 pro to communicate with the phone user.