Visual Guide

Function Description

Features
Details
1. Waveform (WFM)
Display the distribution of brightness or black and white information in the image in the horizontal direction, press and drag the waveform to change the display position of the waveform
2. Vectorscope
Displays the degree of saturation of each color in the image, press and drag the vector map to change the display position of the vector map
3. Histogram
Displays the ratio of brightness or black and white information in the image, press and drag the histogram to change the display position of the histogram
4. Zebra
The area in the image that exceeds the set exposure level displays a diagonal line, and the zebra pattern threshold can be adjusted in the range of 0~100, where the exposure corresponding to 0 is IRE=50, and the exposure corresponding to 100 is IRE=100
5. Auxiliary focus
Colored lines are displayed around the sharp outline of the image. The focus color can be selected from red, yellow, blue, green, and white. The focus sensitivity can be adjusted in the range of 0~100.
6. Pseudo-color
Change to the corresponding color according to the brightness value of the element of the image
7. RGB & Gray
In "Gray" mode, all colors are disabled and the image only displays a gray image. In "Red", "Green", "Blue" mode, only the corresponding color in the image is displayed
8. Cropping
Block the upper and lower sides of the image according to the set aspect ratio to change the aspect ratio of the image. The masking transparency can be adjusted in the range of 0~100. The masking mark function supports the following ratio adjustments: Off, 16:9, 4:3 , 5:4, 1:1.9, 2.41:1, 2.39:1, 2.35:1, 1.9:1, 1.85:185
9. LUT
Color-calibrate the image, preset 5 different 3D-LUT filters, and replace 5 other LUT filters by importing changes from a USB flash drive
Features
Details
10. Color Temperture
Realize that the picture can be viewed at different color temperatures, and four modes of 5600K / 6500K / 7500K / 9300K can be selected
11. Zoom Tool
The part of the screen is enlarged by ×2, ×4, and the zoomed area can be moved and switched by manually sliding the screen.
12. Image Compression
Capable of achieving ×1.25, ×1.33, ×1.5, ×2.0 compression in the vertical direction, and ×2.0 compression in the horizontal direction
13. Screen Freezes
The picture remains the current frame, and the audio continues to play normally
14. Horizontal/vertical Flip
Mirror the screen horizontally or vertically
15. Assistive Grid
You can turn on/off the Jiugongge auxiliary composition
16. record
Turn on the recording mode in the settings, click the record button to record a video of up to 3 minutes
17. playback
Enter the playback interface, you can playback the last recorded video
Visual Guide Contents
Video Solutions
Pyro Ultra
Intercom Systems
Solidcom C1Pro
How Many Groups Does Solidcom C1 Pro Support? How Long Can a Headset Work After It Is Fully Charged? How Long Does It Take to Fully Charge a Battery? How Does the ENC Function Work? How Many Remote Headsets Can Work with One Master Headset Can the Solidcom C1 and Solidcom C1 Pro Work Together? Is the ENC Function Still Available? Does the Solidcom C1 Pro Have the Sidetone Function? How many headsets of the Solidcom C1 Pro 8sHUB version? How many sets Solidcom C1 Pro can work together in the same place in Japan? How many sets of Solidcom C1 Pro-HUB can be cascaded? How to Manage Groups in the Solidcom C1 Pro Hub-based System? How to Check Whether the ENC Function Is Turned On or Not? Why Is There Still Noise After the ENC Function Is Turned On? When Do I Need to Turn On or Off the ENC Function? How to Cascade the Solidcom C1 Pro with a Wired Intercom System of Other Brands? What Should I Do If the Sound from the Solidcom C1 Pro or the Wired Intercom System Is Too Quiet? What Should I Do If I Cannot Hear the Sound from Either of the Devices in a 4-Wire Cascaded Connection? Can the Solidcom C1 Pro Master Headset Pair with the Hub? How to Use the UAC Function of the Solidcom C1 Pro Hub? What should we do if the new headsets paired failed or the connection unstable?(In Japan) How Long Does It Take to Fully Charge a Battery? How to Check Whether the ENC Function Is Turned On or Not? What should I do if I cannot hear the sound from either of the devices? How to Manage Solidcom C1 Pro Groups? Can the Solidcom C1 Pro Master Headset Pair with the Hub? How to Use the UAC Function?
Solidcom C1
How Many Groups Does the Solidcom C1 Support? How Long Can a Headset Work After It Is Fully Charged? Will the Audio Quality Be Affected When Multiple Sets of Systems Are Casdaded? How many sets of Solidcom C1-HUB can be cascaded? How Many Remote Headsets Can Work with One Master Headset? How many headsets of the Solidcom C1 8sHUB version? How many sets Solidcom C1 can work together in the same place in Japan? How to Manage Groups in the Solidcom C1 Hub-based System? How to Check the Headset Battery Level? How to Cascade the Solidcom C1 with a Wired Intercom System of Other Brands? What Should I Do If the Sound from the Solidcom C1 or the Wired Intercom System Is Too Quiet? How to Cascade the Solidcom C1 with a Wireless Intercom System of Other Brands? What Should I Do If I Cannot Hear the Sound from Either of the Devices in a 4-Wire Cascaded Connection? Can the Solidcom C1 Master Headset Pair with the Hub? How to Use the UAC Function of the Solidcom C1 Hub? What Should I Do If the Connection Between the Headsets and Hub Is Normal (the Headset Battery Level Is Displayed on the Hub Screen Normally) But the Call Between the Headsets Fails? What should we do if the new headsets paired failed or connection unstable?(In Japan) Can't hear the sound from each other? Will there be disturbance between wireless intercom system and other wireless transmission device in a shooting field? What should be awared of when using multiple sets of wireless intercom? Will the quality of call be reduced when multiple sets of intercom are casdaded? What is the maximum length of cat5e cable during cascading? Is there any specification requirement for the cable? What is the meaning of green flashing light on the headset? How long can the battery last? How to know the headset will be out of battery soon? How to connect the Hub to computer for online meeting/shooting? All settings are good in meeting software, I am able to listen others' voice but why is my voice not heard by others? Connection between beltpacks and Hub is normal (the Hub is displaying beltpacks battery volume), but why the call between headsets has failed? How to pair the Hub with the headsets? Which HUB should I connect to the PC when I cascade multiple sets of Solidcom C1 by IP?
Wireless Microphones
LARK 150