Pyro 5 4K

Firmware Release Notes

Upgrade Tutorial

Important Precautions (Before You Start)

• ⚠️The USB flash drive must have a capacity of 32GB or less. Otherwise, the USB flash drive cannot be formatted into FAT32 format.
• ⚠️Maintain sufficient power during the upgrade process. Do not pull out the USB flash drive before the upgrade is successful.
• ⚠️After the device is upgraded, the default settings are restored.
• ⚠️Upgrade may cause unknown errors. Avoid upgrading when you need to use it.
• ⚠️For firmware upgrade, please check the device hardware version (H000 or H100) and select the corresponding firmware.
  

Required Upgrade Tool

Upgrade with USB flash drive

Format the Flash Drive to FAT32

1. Windows how to set the USB flash disk format

2. Mac how to set the USB flash disk format

Upgrade Instructions

1. Go to the network disk link provided on the page to download the firmware and unzip it.
2. Connect the USB flash drive to the computer. If it is not Type-C interface, use the standard USB Type-C adapter to connect. Place the upgrade files directly in the root directory of the USB flash drive. Do not create them in the folder.
3. Connect the USB flash drive to the Type-C interface of Pyro 5 4K. The system automatically recognizes the USB flash drive, restarts the image transmission, and then starts the upgrade. After the upgrade is completed, the image transmission will restart again.