杨聪 Published at: 2026-11-03

How can I add an IP camera?——Controller

Firstly, swicth controller to "Digital" mode so that it can accept IP cameras.
  1. Press [ENTER] and assign a camera ID.
  2. Select the control protocol: •VISCA (UDP) •VISCA (TCP) •Sony VISCA •ONVIF
  3. Press [ENTER] to save.
  4. Enter the camera IP address, then press [ENTER].
  5. Enter the port number, then press [ENTER].
  6. Enter the camera username, then press [ENTER].
  7. Enter the camera password, then press [ENTER].
  8. Username and password are not required when using VISCA (UDP), VISCA (TCP), or Sony VISCA.
    Default Port Numbers
    •VISCA (UDP): 1259
    •VISCA (TCP): 5678
    •Sony VISCA: 52381
    •ONVIF: 80 or 2000
Submit Feedback
Previous
Why can't I add a third-party camera using ONVIF?——Controller
Next
How can I add an serial camera?——Controller