MOMA无线技术
Published at: 2025-11-10
3D-LUT
For Mars M1
LUT import
Operate:
- Put the LUT file into the USB disk formatted as FAT32, and use the OTG adapter to connect the USB disk to the [USB-C] interface of Mars M1
- Click the [LUT icon] of Mars M1, select [LUT import], and wait for the system to retrieve the LUT file to be loaded in the USB disk
Note: The suffix of the LUT file must be [.cube], and the file name cannot exceed 128 letters
- Select the LUT file to be loaded, and select any location (F1~F5) in the pop-up window as the target import location of the file
- Click [LUT Import] to import the corresponding LUT file to the selected import location
LUT application
- Click the LUT icon to apply the LUT file on the F1 button by default
- Click other buttons to apply the LUT on the corresponding button
- Click the selected button again to close the corresponding LUT application
- Click on the LUT icon or elsewhere on the screen to close the LUT secondary application menu
Note: The 5 default camera LUT files are:
F1: Canon_C-Log.cube
F2: Canon_C-Log2.cube
F3: Sony_S-Log.cube
F4: Sony_S-Log2.cube
F5: Slog3to709TypeA.cube
