朱斌
Published at: 2025-11-13
How to import and apply the 3D LUT file to the Pyro 5?
For Pyro 5
Import the 3D LUT(SD card or USB flash disk):
1. Please prepare a USB flash disk whose capacity is less than 32GB. Then format the flash disk as FAT 32 or NTFS. (Please ignore this step when you use an SD card.)
2. Import the 3D LUT file into the flash disk or SD card.
3. Plug the flash disk into the USB-C port at the rear of Pyro 5, or insert the SD card into the SD car port at the side of Pyro 5.
4. Please choose 3D LUTs from the toolbar. Choose a LUT from L1 to L5. Then select Import LUT. The imported LUT will replace the one you selected..
Note:
➢ Pyro 5 only supports .cube LUT files.
➢ Pyro 5 supports 16/17/32/33/64/65 bit LUT files.
3D LUT Application:
1. Click the monitor screen to wake up the bottom menu bar. Then click the rightmost secondary menu icon to open the full toolbar.
2. Find the 3D LUTs menu in the toolbar, click L1-L5 under the menu bar to apply the corresponding LUT file.
1. Please prepare a USB flash disk whose capacity is less than 32GB. Then format the flash disk as FAT 32 or NTFS. (Please ignore this step when you use an SD card.)
2. Import the 3D LUT file into the flash disk or SD card.
3. Plug the flash disk into the USB-C port at the rear of Pyro 5, or insert the SD card into the SD car port at the side of Pyro 5.
4. Please choose 3D LUTs from the toolbar. Choose a LUT from L1 to L5. Then select Import LUT. The imported LUT will replace the one you selected..
Note:
➢ Pyro 5 only supports .cube LUT files.
➢ Pyro 5 supports 16/17/32/33/64/65 bit LUT files.
3D LUT Application:
1. Click the monitor screen to wake up the bottom menu bar. Then click the rightmost secondary menu icon to open the full toolbar.
2. Find the 3D LUTs menu in the toolbar, click L1-L5 under the menu bar to apply the corresponding LUT file.
