杨涛 Published at: 2026-01-27

4Wire Cascade Settings

For Solidcom C1 Pro-Roming HUB.
  1. Use a standard network cable to connect two hubs via the 4-wire interface. The length of the network cable is up to 300 meters.
  1. After connecting two hubs using a network cable, select 4 Wire > Pinout Switch on the hubs, and then select Standard on one hub and Cross on the other hub.
PLEASE NOTE: Cascading using 4-Wire interface does not give the roaming function.
Submit Feedback
Previous
Hub Installation
Next
IP Cascade Settings