MOMA无线技术
Published at: 2025-11-10
Introduction to the Walkie-Talkie Converter Box interface
For Walkie-Talkie converter box
No. | Name | Description |
1 | 4WRIE (RJ45 interface) | Can be connected to SolidcomM1/SolidcomC1/SolidcomC1pro/SolidcomM1 pro/Solidcom H1 and other wireless communication systems using network cables |
2 | 4 WRIE IN (XLR interface) | These two interfaces form a group and can be used to connect to SolidcomM1/SolidcomC1/SolidcomC1pro/SolidcomM1 pro/Solidcom H1 |
3 | 4 WRIE OUT (XLR interface) | |
4 | TRANSCEIVER (5-pin XLR interface) | Used to connect to the Walkie-Talkie。5PINs definition for Walkie-Talkie port：PIN1 Audio out, PIN2 GND, PIN3 Audio IN+, PIN4 audio IN-, PIN5 PTT. |
5 | 12V DC interface | Power supply interface for intercom pairing |
6 | TALK button | In VOC off state, the TALK button must be pressed for the intercom to hear the audio signal from the wireless system The TALK button is similar to the speaking button of the intercom |
7 | VOX switch | When the VOX switch is turned on, there is no need to hold down the TALK button for the intercom to receive audio signals from wireless communication VOX activation is similar to the speaking button of the intercom |
Note:The wireless communication system cannot turn off the audio signal transmitted by the intercom (after cascading with the intercom, the wireless communication can always hear the sound of the intercom) | ||
