MOMA无线技术
Published at: 2025-11-10
LARK M2 Camera receiver connection introduction
For LARK M2
Q1、Camera Connection via a 3.5mm TRS to 3.5mm TRS cable:
1. Mount the Receiver (receiver) to the camera cold shoe.
2. Connect the receiver to a camera using the 3.5mm TRS to 3.5mm TRS cable. Plug the cable into the microphone interface on the camera (Attention is not the monitoring interface).
3. The recording volume or electrical level of the camera needs to be as low as possible to avoid audio clipping and turn the receiver's knob to adjust the volume to proper level.
